MXR Micro Chorus MN3007 retrofit

This has been discussed at the stompbox forum. First, This is NOT yet verified as far as I'm concerned. I haven't built one either since I have my CE-2 clone. The layout is only based from the retrofit's schematic using MN3007 BBD instead of the original SAD512. Suppose, if the retrofit schematic is correct and working, then there is no reason that the layout won't work. By then, build at your own risk!. Pot is 500K reverse log(audio) type. Transistors could be any common NPN's (2N5088, 2N3904, etc).

(PS: May mga follower na din pala ako na taga.PM..pagkakuyaw jud mga bai!..)

Layout Download

Echo Base Digital Delay

This is my version of Ian's(slacker at DIYstompboxes.com) Echo Base PT2399 digital delay with minor alterations. I use JFET switching instead of 4066 CMOS switching. Some time ago I had problems with this CMOS leading my unit to fail and I don't even know why. Haha. Anyway, pot values are; LEVEL, REPEAT, and DEPTH is 100K-audio(you might want to try linear tapered pots on these); TIME is 50K linear taper; and SPEED is 1M linear( but I used reverse log taper on my build, so you decide!).
I use J113 for the JFET's salvaged from an old broken DOD pedal. You can use either J201 or similar. And also I used an 11 volt zener(1N4741) as protection diode. Bypass switching is illustrated in the pdf file.
The layout is very compact, designed to accomodate miniature electrolytics or boxed film capacitors. Layout's verified? Oh yes!

Layout Download

Mad Professor Snow White Autowah

Here you go, this is the Mad Professor Snow White Autowah layout.Very much verified and working! Enjoy fellas.

Layout Download

EQ and more Distortions!

Yamaha NE-1 and some customized distortion circuits to be posted this week. More over on this next time!

Tech 21 XXL

Here you go as requested, this is the Tech 21 XXL distortion layout minus the CMOS switching and the input buffer of the original circuit. You may want to add a capacitor from 0.1uF-1uF in the jumper labeled as "Cin?" and also changing the biasing ressistor labeled "100K??" into a 1M resistor. Anyway, that is just only a suggestion. Pots are all 100K LINEAR.

Layout Download

DNA Gain F***er 2

This is the layout of the Gain F***er 2 distortion from DNA Analogic. Pads are provided to FETs and bipolar transistors that has different pinouts. Pots are all 100K. I would recommend using log tapers at DRIVE and LEVEL controls, a reverse audio taper at CUT, and a linear one at the FXXX control. Enjoy!

Layout Download

Layout Downloads

Hi, mi amigos!!. Starting today layouts will now be provided with download links as you can see. Every now and then links are added accordingly. Thanks. c'ya.

Enjoy!!!