Custom Search

Wednesday, July 8, 2009

DNA Gain F***er 2


This is the layout of the Gain F***er 2 distortion from DNA Analogic. Pads are provided to FETs and bipolar transistors that has different pinouts. Pots are all 100K. I would recommend using log tapers at DRIVE and LEVEL controls, a reverse audio taper at CUT, and a linear one at the FXXX control. Enjoy!

Layout Download


Posted by at
Labels: , , , ,

14 comments:

  1. AnonymousJuly 9, 2009 at 8:43 AM

    Hello.

    Nice work :)

    Any chances for Tech21 XXL pcb layout? :)

    ReplyDelete
  2. rapidriotJuly 9, 2009 at 6:14 PM

    I'll work on it. Cheers

    ReplyDelete
  3. rapidriotJuly 11, 2009 at 11:00 AM

    I've already finished drawing the layout yesterday just after my reply but forgot to upload it unfortunately. I'll post it tomorrow.

    ReplyDelete
  4. FacuSeptember 15, 2009 at 6:03 PM

    Hi, my name is Facundo, im from Argentina, i want to say you THANKS for all those layouts and pcb's =)

    about this circuit:
    what is the IC 47358 i had been searching a datasheet but i didn't find anything

    ReplyDelete
  5. rapidriotSeptember 16, 2009 at 4:26 PM

    Hi,

    You can find it here, http://www.datasheetcatalog.org/datasheet/FujitsuMicroelectronics/mXyzytyy.pdf

    Cheers

    ReplyDelete
  6. FacuSeptember 16, 2009 at 6:00 PM

    thank you so much =)

    is it a common dual operational amplifier?
    a TL027 o a rc4558 will work

    ReplyDelete
  7. AnonymousOctober 3, 2009 at 9:19 PM

    i wanna try this project but i have not component list ...can you help mi? pliz in my email(rex_sound@yahoo.com)thanx b4 by rex_ibanezer

    ReplyDelete
  8. rapidriotNovember 25, 2009 at 5:03 AM

    Sorry, I can't help you right now. The component list is very self explainatory. Just look over the pdf file and list(the components) them.

    @Facu,

    Yeah, I think so.

    ReplyDelete
  9. AnonymousMay 14, 2010 at 9:16 AM

    very good job, cool you send me the schemaatics to my email d0dit@yahoo.com. thanks

    ReplyDelete
  10. UnknownSeptember 8, 2010 at 5:48 AM

    hi, it's didn't work. are your pcb verified?

    ReplyDelete
  11. rapidriotSeptember 21, 2010 at 10:51 PM

    yes!. Kindly double check your work first.

    ReplyDelete
  12. AnonymousSeptember 25, 2010 at 10:05 AM

    hi, its pavlidos1, i triple checked). guy with nick d0dit built one an it didn't work too. i repair it by soldering 4.7k resistor from 4,5v to Ic1 (like it was in gain fxxxker 1). Maybe i was wrong with something ( i use lm358 instead of mb47358)but now it works. and thank you very much for you work and answers).

    ReplyDelete
  13. AnonymousOctober 2, 2010 at 10:29 AM

    hi, it's pavlindos1. maybe i was wrong with 1n4007 polarity? could help me with it? ( i mean 1n4007)

    ReplyDelete
  14. AnonymousNovember 8, 2013 at 10:51 PM

    please, send me the schematics to my email heize@mail.ru. thanks

    ReplyDelete

Subscribe to: Post Comments (Atom)